Residentia Level 2 Type 2 EVSE Charger 7KW

Residentia Level 2 Type 2 EVSE Charger 7KW
Részletek:
Rated Input Voltage: 220V AC±20% (Support work at voltage 120V AC)
Frequency: 50Hz / 60Hz
Output Power: 7KW
Output Current: 32A
A szálláslekérdezés elküldése
Letöltés
Leírás
Műszaki paraméterek

Residentia Level 2 Type 2 Evse Charger 7KW

  • Method 1 Plug and Charge

    Plug and Charge means automatic charging.

    After the EVSE is connected to the car, it will automatically start charging. When battery full, the EVSE charger will automatically stop charging;

  • 3. CHARGING METHOD.png

    Method 2 Swipe RFID Card (IC Card)

    If you are worried that other people use your EVSE without your permission, RFID function can be added.

    Then only those who own any of the three RFID cards can charge the car on this 7KW Type2 charger. Any other RFID that is not entered into the EVSE software cannot be identified and can't start charging;

  • Method 3 APP Control

    You can use a mobile app to remotely control the charging station to start or stop charging, adjust the output current of the station (adjustable range 8-32A), and monitor charging data in real-time on the app! If you have selected CT Kit, you can also use the app to control dynamic load balance or solar charging;

 

IEC 62196-2 TYPE2

220V AC ± 20%, 1-phase 

220V AC ± 20%, 1-phase

32A
7kW
45 /65 Hz

N/A for HOME-Basic Version

WIFI optionl for HOME-Upgrade Version

OCPP1.6 J/4G/WIFI/LAN for Commercial Version

>= IP55 (For Outdoor  and Indoor)
-30℃- +50℃
238mm x 95mm x 348mm

WALLBOX EV CHARGER.jpg

01.

Residential EV charger, also called home EV charger, refers to the installation of EV charging equipment in residential areas, allowing car owners to charge their EVs conveniently at home. This type of EV charging usually requires the installation of a dedicated charging station, also known as Electric Vehicle Supply Equipment (EVSE), which can safely and quickly power EVs.

7KW residentia level 2 type 2 EVSE charger is a ideal product for residential / home EV charging. With this EV charger, drivers can safety charge their EVs at home.

02.IIs this EVSE a level 1 or level 2 charging station?

7KW residentia level 2 type 2 EVSE charger is a Level 2 charger.

Level 1 Charger: Level 1 chargers provide slow-speed charging for electric vehicles and typically use standard household power outlets (120 volts in the US). These chargers are designed for overnight charging at home or during extended parking at workplaces.

Level 1 chargers charge at a slower rate, typically providing about 2 to 5 miles of range per hour of charging. They are suitable for overnight charging or for owners with lower daily driving range needs.

Level 2 Charger: Level 2 chargers are medium-speed charging devices for electric vehicles that require higher power 240-volt outlets, similar to those used for large household appliances like dryers.

These chargers significantly increase charging speeds, adding about 10 to 60 miles of range per hour of charging. Installation of Level 2 chargers typically requires a certified electrician to ensure safety and compliance with electrical codes.

Level 2 chargers are designed for overnight charging at home or for charging during extended periods at workplaces.

03.

The answer isn't always straightforward, but in many cases, an upgrade isn't necessary. Take, for instance, the scenario where you pair a Senku charger with a CT Kit. By doing so, you can activate the Power Boost feature. This innovative function modifies the charging speed of your EV according to the overall power consumption in your home.

Here's how it works: when the electrical usage in your household is high, the charging speed of the EV automatically slows down. Conversely, when the power demand is low, the charger ramps up the speed to charge the vehicle more quickly. This intelligent adjustment not only safeguards against potential fuse - blowing incidents but also saves you from having to shell out for expensive electrical system upgrades.

 

1. EV CHARGER CABLE (1).jpg

1 EV CHARGER CABLE 19

 

 

 

SENKU MACHINERY is a professional EV charging solution supplier of electric vehicle components,including all kinds of EV charging connectors (plugs&sockets), EV charging cables, EV charging Adapter, EV charging stations...With an annual output of more than 200,000 sets of charging connectors and more than 50000 units of charging stations. Our products got the certification of UL, TUV, ETL, CE. 

With rich experience and research institutions, advanced equipment and professional technical teams, SENKU MACHINERY can design, produce, develop and provide high quality products for enterprises and clients, by taking advantages of abundant industrial resources and extrusive influential, SENKU MACHINERY carries out consultations services related to products, technologies, market and projects.

 
01
 

Efficient and precise processing and testing equipment.

 
02
 

Passed ISO9001 certification and obtained relevant patent certificates.

 
03
 

High-Quality Customized Services

No intermediate links, providing one-stop service from design, processing, mold trial to mass production.

senku charger

 

 

Népszerű tags: Residentia Level 2 Type 2 EVSE Charger 7KW, Residentia Level 2 Type 2 EVSE Charger 7KW suppliers, manufacturers, factory

A szálláslekérdezés elküldése